64. Voice VLAN Commands
622
64.11. show voice_vlan ports
Description
This command is used to display port voice VLAN information.
Format
show voice_vlan ports {<portlist>}
Parameters
If no parameter is specified, all voice VLAN port information will be displayed.
Restrictions
None.
Example
To display voice VLAN ports 1 to 3:
Zxxx0:admin#show voice_vlan oui
Command: show voice_vlan oui
OUI Address Mask Description
------------------ ----------------- ---------------
00-01-E3-00-00-00 FF-FF-FF-00-00-00 Siemens
00-03-6B-00-00-00 FF-FF-FF-00-00-00 Cisco
00-09-6E-00-00-00 FF-FF-FF-00-00-00 Avaya
00-0F-E2-00-00-00 FF-FF-FF-00-00-00 Huawei&3COM
00-60-B9-00-00-00 FF-FF-FF-00-00-00 NEC&Phillips
00-D0-1E-00-00-00 FF-FF-FF-00-00-00 Pingtel
00-E0-75-00-00-00 FF-FF-FF-00-00-00 Veritel
00-E0-BB-00-00-00 FF-FF-FF-00-00-00 3COM
Total Entries: 8
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to display.
ワヰヵユ
ワヰヵユ
Summary of Contents for ZEQUO 2200
