Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 288 / 726

34. Limited Multicast IP Address Commands
288

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To add a range of multicast addresses to a profile:
34.3. config mcast_filter_profile ipv6

Description
This command is used to add or delete a range of previously defined IPv6 multicast IP
addresses to or from the profile.

Format
config mcast_filter_profile ipv6 [profile_id <value 1-60> | profile_name <name 32>]
{profile_name <name 32> | [add | delete] <mcastv6_address_list>}(1)
 Parameters
Zxxx0:admin#config mcast_filter_profile profile_id 2 add 225.1.1.1 - 225.1.1.100
Command: config mcast_filter_profile profile_id 2 add 225.1.1.1 - 225.1.1.100
Success.
Zxxx0:admin#
profile_idSpecify the ID of the profile.
<value 1-60>
The profile ID must be between 1 and 60.
profile_name
Specifies the name of the profile.
<name 32>
The profile name can be up to 32 characters long.
profile_name
Specify a new name of the profile.
<name 32>
The profile name can be up to 32 characters long.
add Specify to add a range of multicast IP addresses.
deleteSpecify to delete a range of multicast IP addresses.
<mcastv6_address_list>
List of the IPv6 multicast addresses to be added to or deleted from the
profile. Either specifiy a single IPv6 multicast IP address or a range of IPv6
multicast addresses using a hyphen.