Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 225 / 726

27. IGMP Snooping Commands
225

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure IGMP snooping:
27.2. config igmp_snooping querier

Description
This command is used to configure the IGMP snooping querier.
 Format
config igmp_snooping querier [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all]
{query_interval <sec 1-65535> | max_response_time <sec 1-25> | robustness_variable
<value 1-7> | last_member_query_interval <sec 1-25> | state [enable | disable] |
version <value 1-3>} (1)
fast_leave
Enable or disable the IGMP snooping fast leave function. If enabled, the membership is
immediately removed when the system receive the IGMP leave message.
enable
Enable the IGMP snooping fast leave function.
disable
Disable the IGMP snooping fast leave function.
proxy_reporting
Specifies the proxy reporting option.
state Specifies the proxy reporting state.
enable
Specifies that the proxy reporting option will be enabled.
disable
Specifies that the proxy reporting option will be disabled.
source_ip
Specifies the source IP address used.
<ipaddr>
Enter the source IP addres used here.
Zxxx0:admin#config igmp_snooping vlan_name default state enable fast_leave enable
Command: config igmp_snooping vlan_name default state enable fast_leave enable
Success.
Zxxx0:admin#