Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 109 / 726

12. BPDU Attack Protection Commands
109
12.2. config bpdu_protection recovery_timer
 Description
When a port enters the under attack state, it can be disabled or blocked based on the
configuration. The state can be recovered manually or by the auto recovery
mechanism. This command is used to configure the auto-recovery timer. To manually
recover the port, the user needs to disable and re-enable the port.

Format
config bpdu_protection recovery_timer [<sec 60-1000000> | infinite]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the BPDU protection recovery timer to 120 seconds for the entire
Switching Hub:
<sec 60-1000000>
Specify the timer (in seconds) used by the Auto-recovery mechanism to recover the port.
The valid range is 60 to 1000000. Auto-recovery time is 60 seconds by default.
infinite Specify the port will not be auto recovered.
Zxxx0:admin#config bpdu_protection recovery_timer 120
Command: config bpdu_protection recovery_timer 120
Success.
Zxxx0:admin#