Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 632 / 726

65. VLAN Commands
632

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the port VLAN:
65.8. show port_vlan

Description
This command is used to display the GVRP status for a port list on the Switching Hub.

Format
show port_vlan {<portlist>}
 Parameters
If no parameter is specified, the system will display GVRP information for all
ports.
 Restrictions
None.
acceptable_frame
Specify the type of frame that will be accepted by the port.
tagged_only
Only tagged frame will be received.
admit_all
Both tagged and untagged frames will be accepted.
pvid Specify the Port VID (PVID) that will be associated with the port.
<vlanid 1- 4094>
Specify the VLAN ID between 1 and 4094.
Zxxx0:admin#config port_vlan 1-5 gvrp_state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Command: config port_vlan 1-5 gvrp_state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Success.
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to be displayed.
ワヰヵユ ワヰヵユ