Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 592 / 726

63. Utility Commands
592

Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To upload firmware from a file system device to a TFTP server:
To upload the current configuration file to a TFTP server:
To upload all logs to a TFTP server:
To upload a dangerous log:
unit (Optional) Specifies which unit on the stacking system. If it is not specified, it refers to the
master unit.
<unit_id 1-4>
Enter the unit ID used here.
src_file (Optional) Specify an absolute path name on the device file system. If the path name is
not specified, it refers to the boot up image.
<pathname>
Specify an absolute path name on the device file system. If the path name is not
specified, it refers to the boot up image.
Zxxx0:admin#upload firmware_toTFTP 10.1.1.1 dest_file D:\firmware.rom src_file
1.0.0.xx.rom
Command: upload firmware_toTFTP 10.1.1.1 dest_file D:\firmware.rom src_file
1.0.0.xx.rom
Connecting to server.................. Done.
Upload firmware....................... Done.
Zxxx0:admin#
Zxxx0:admin#upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\Zxxx0.cfg
Command: upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\Zxxx0.cfg
Connecting to server.................. Done.
Upload configuration.................. Done.
Zxxx0:admin#
Zxxx0:admin#upload log_toTFTP 10.48.74.121 dest_file c:\log\Zxxx0.log
Command: upload log_toTFTP 10.48.74.121 dest_file c:\log\Zxxx0.log
Connecting to server.................. Done.
Upload log............................ Done.
Zxxx0:admin#