Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 472 / 726

50. QoS Commands
472
50.9. config 802.1p user_priority

Description
This command is used to configure the way by which the Switching Hub will map an
incoming packet, based on its 802.1p user priority, to one of the eight available
hardware priority queues on the Switching Hub. The Switching Hub's default is to
map the following incoming 802.1p user priority values to the eight hardware priority
queues. The suggested mapping is shown in the following table. Users can change
this mapping by specifying the 802.1p user priority to assign to the <class_id>.
Priority in Frames Priority Queue of ASIC Remark
0 2 Mid-Low
1 0 Lowest
2 1 Lowest
3 3 Mid-Low
4 4 Mid-High
5 5 Mid-High
6 6 Highest
7 7 Highest

Format
config 802.1p user_priority {ports [<portlist> | all]} <priority 0-7> <class_id 0-7>

Parameters
Zxxx0:admin#show scheduling_mechanism 1-10
Command: show scheduling_mechanism 1-10
Port Mode
----- ------
1 Strict
2 Strict
3 Strict
4 Strict
5 Strict
6 Strict
7 Strict
8 Strict
9 Strict
10 Strict
Zxxx0:admin#
<priority 0-7>
Specify the 802.1p user priority to associate with the <class_id> (the number of the
hardware queue).