Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 589 / 726

63. Utility Commands
589

Restrictions
Only Administrator-level users can issue this command.

Example
To download firmware from an RCP server:
rcp: Syntax: rcp: username@ipaddr/directory/filename.
Example for full path: user_name@10.1.1.1/home/user_name/desxxxx.rom;
Example for relative path: user_name@10.1.1.1./desxxxx.rom;
Example for omitted user name in RCP string: 10.1.1.1./desxxxx.rom.
Note: No spaces are allowed in the <string>.
<string 128>
Syntax: rcp: username@ipaddr/directory/filename.
Example for full path: user_name@10.1.1.1/home/user_name/desxxxx.rom;
Example for relative path: user_name@10.1.1.1./desxxxx.rom;
Example for omitted user name in RCP string: 10.1.1.1./desxxxx.rom;
Note: No spaces are allowed in the <string>.
unit Specifies which unit on the stacking system. If it is not specified, it refers to the master
unit.
<unit_id 1-4>
Enter the unit ID used here. This value must be between 1 and 4.
all Specifies that all the units in the stacking system will be used.
dest_file (Optional) Specify the path and file name of the destination file on the device.
<pathname>
Specify the path and file name of the destination file.
boot_up Specify as boot up file.
Zxxx0:admin#download firmware_fromRCP username rcp_user 10.90.90.90 src_file /
home/Zxxx0.rom
Command: download firmware_fromRCP username rcp_user 10.90.90.90 src_file /home/
Zxxx0.rom
Connecting to server................... Done.
Download firmware...................... Done. Do not power off !!
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
Zxxx0:admin#