Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 593 / 726

63. Utility Commands
593
63.5. upload attack_log_toRCP
 Description
This command is used to upload the attack log file from the device to an RCP server.
If a user specifies the relative file path, the path search strategy will
depend on the server system. For some systems, it will search the current
user working directory first, and then search the environment paths.

Format
upload attack_log_toRCP [{username <username>} {<ipaddr>} dest_file
<path_filename 64> | rcp: <string 128>] {unit <unit_id 1-4>}
 Parameters

Restrictions
Only Administrator and Operator-level users can issue this command.
Zxxx0:admin# upload attack_log_toTFTP 10.48.74.121 dest_file c:\alert.txt
Command: upload attack_log_toTFTP 10.48.74.121 dest_file c:\alert.txt
Connecting to server................... Done.
Upload attack log...................... Done.
Success.
Zxxx0:admin#
username(Optional) The remote user name on the RCP Server.
<username>
Enter the remote username used here.
<ipaddr>(Optional) Enter the IP address used for the configuration here.
dest_file Specifies the destination file used.
<path_filename 64>
The pathname specifies the pathname on the RCP server or local device.
rcp: Syntax: rcp: username@ipaddr/directory/filename.
Example for full path: user_name@10.1.1.1/home/user_name/desxxxx.rom;
Example for relative path: user_name@10.1.1.1./desxxxx.rom;
Note: Do not use any blank spaces in the <string>.
<string 128>
Enter the RCP string here.
unit (Optional) Specifies which unit on the stacking system. If it is not specified, it refers to the
master unit.
<unit_id 1-4>
Enter the unit ID used here. This value must be between 1 and 4.
ワヰヵユ ワヰヵユ