Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 420 / 726

45. Network Monitoring Commands
420
45.6. clear counters

Description
This command is used to clear the Switching Hub's statistics counters.

Format
clear counters {ports <portlist>}
 Parameters
If no parameter is specified, the system will count all of the ports.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To clear the Switching Hub's statistics counters for ports 7 to 9:
Zxxx0:admin# show utilization flash
Command: show utilization flash
FLASH Memory Utilization :
Total FLASH : 30608 KB
Used FLASH : 4786 KB
Utilization : 15%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
ports Specify a range of ports to be configured. The beginning and end of the port list range
are separated by a dash.
<portlist>
Specify a range of ports to be configured.
Zxxx0:admin#clear counters ports 7-9
Command: clear counters ports 7-9
Success.
Zxxx0:admin#
ワヰヵユ ワヰヵユ