Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 474 / 726

50. QoS Commands
474

Example
To display the 802.1p user priority:
50.11. config 802.1p default_priority

Description
This command is used to specify default priority for untagged packets received on a
port of the Switching Hub.

Format
config 802.1p default_priority [<portlist> | all ] <priority 0-7>

Parameters
Zxxx0:admin#show 802.1p user_priority
Command: show 802.1p user_priority
QoS Class of Traffic
Port 1
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
Port 2
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
Zxxx0:admin#
<portlist>
Specify a range of ports for which the default priority is to be configured. That is, a range
of ports for which all untagged packets received will be assigned the priority specified
below. The beginning and end of the port list range are separated by a dash.
all Specify that the command applies to all ports on the Switching Hub.
<priority 0-7>
Specify a priority value (0 to 7) to assign to untagged packets received by the Switching
Hub or a range of ports on the Switching Hub.