Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 397 / 726

44. Network Management Commands
397
44.3. create trusted_host
 Description
This command is used to create the trusted host. The Switching Hub allows you to specify
up to twenty IP addresses (or IP ranges) that are allowed to manage the Switching Hub via
in-band SNMP or Telnet based management software. These IP addresses must be
members of the Management VLAN. If no IP addresses are specified, then there is nothing
to prevent any IP address from accessing the Switching Hub, provided the user knows the
Username and Password.

Format
create trusted_host [<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] {snmp | telnet | ssh | http | https | ping}

Parameters
If no management method is specified, the IP (range) can access the Switch
through any method.
Zxxx0:admin#disable snmp
Command: disable snmp
Success.
Zxxx0:admin#
<ipaddr>Specify the IP address of the trusted host.
<ipv6addr>
Specify the IPv6 address of the trusted host.
network Specify the network address of the trusted network. The form of network address is
xxx.xxx.xxx.xxx/y.
<network_address>
Specify the network address of the trusted network. The form of network address
is xxx.xxx.xxx.xxx/y.
ipv6_prefix
Specify the IPv6 network address of the trusted network.
<ipv6networkaddr>
Specify the IPv6 network address of the trusted network.
snmp (Optional) Specify the trusted host for SNMP.
telnet (Optional) Specify the trusted host for Telnet.
ssh (Optional) Specify the trusted host for SSH.
http (Optional) Specify the trusted host for HTTP.
https (Optional) Specify the trusted host for HTTPs.
ping (Optional) Specify the trusted host for Ping.
ワヰヵユ ワヰヵユ