Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 108 / 726

12. BPDU Attack Protection Commands
108
12.1. config bpdu_protection ports
 Description
This command is used to configure port state and mode for BPDU protection.

Format
config bpdu_protection ports [<portlist> | all] {state [enable | disable] | mode [drop |
block | shutdown]} (1)

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure port state to enable and drop mode:
<portlist>Specify a range of ports to be configured.
all Specify to set all ports in the system.
state Specify the BPDU protection state. The default state is disabled.
enable
Enable the BPDU protection state.
disable
Disable the BPDU protection state.
mode Specify the BPDU protection mode. The default mode is shutdown.
drop Specify to drop all received BPDU packets when the port enters the under attack
state.
block Specify to drop all packets (include BPDU and normal packets) when the port
enters the under attack state.
shutdown
Specify to shut down the port when the port enters the under attack state.
Zxxx0:admin#config bpdu_protection ports 1 state enable mode drop
Command: config bpdu_protection ports 1 state enable mode drop
Success.
Zxxx0:admin#