background image

CSM_D4JL_D4JL-SK40_DS_E_7_2

1

Guard Lock Safety-door Switch/Slide key

D4JL/D4JL-SK40

Holding Force of 3,000 N

• Two safety circuits and two monitor contacts provide an 

array of monitoring patterns.

• Standard gold-clad contacts enable use with ordinary loads 

and microloads.

• Models with trapped keys prevent workers from being locked 

in hazardous work areas.

• Models with rear release buttons allow people to unlock the 

Switch and escape if they are locked into hazardous areas.

• IP67 degree of protection

Features

Plastic Guard Lock Safety-door Switches 
Rank Among the Strongest in the World

A holding force of 3,000 N makes these Switches suitable for large, 
heavy doors.

Two Safety Circuits and Two Monitor 
Contacts

The D4JL has two safety circuits. It also has two contacts to 
separately monitor the open/closed status of the door and the status 
of the lock.

Wide variations to protect workers who 
enter hazardous areas.

Models with Trapped Keys (mechanical lock models only)

As long as a person has the trapped key when he enters a 
hazardous area, he does not have to worry about somebody 
locking the door and trapping him inside. 
The door can be opened only by supplying power to the solenoid 
and then turning the trapped key to unlock the D4JL.

There are thirty different types of trapped keys available for use in 
applications with adjacent hazardous areas. 

Models with Rear Release Buttons

A rear release button allows the door to be unlocked from inside a 
hazardous area in an emergency. 

Special Slide Key

A special Slide Key shortens the lead time for mounting design.
The padlock that can be attached to the disable-prevention cover 
prevents other workers from restarting machines. 
(See page 5 for details.)

Be sure to read the 

“Safety Precautions” 

on page 24.

G

u

ard Lock Safety-door S

w

itch

Slide keys

For the most recent information on models that have been certified for 
safety standards, refer to your OMRON website.

41

51

52

63

64

42

Lock Monitor Switch

Door Open/Closed 

Detection Switch

Monitoring 
the door lock

Monitoring the open/
closed status of the door

11

12

To safety circuit

To safety circuit

To control circuit

33

34

22

21

Rear release 

bu

tton

Rear release 

bu

tton

D4JL-

@@@

A-

@

8-01-SJ

D4JL-

@@@

A-06

Summary of Contents for D4JL Series
































Reviews: