![background image](http://html.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_operators-manual_685695454.webp)
4. Remove the four bolts (A) securing the reel tube to the
U-joint
fl
ange (B).
Figure 5.276: U-Joint
5. Move the right-hand reel sideways to separate the reel
tube (A) from the U-joint (B).
6. Remove the drive chain (C).
7. Route the new chain (C) over the U-joint (B) and
position onto the sprockets.
Figure 5.277: Replacing Chain
8. Position the right-hand reel tube (A) against the
reel drive and engage the stub shaft into the U-joint
pilot hole.
9. Rotate the reel until the holes in end of the reel tube
and U-joint
fl
ange (B) line up.
10. Apply Loctite
®
#243 (or equivalent) to four 1/2 in.
bolts (A) and secure with lock washers.
11. Torque to 75–85 ft·lbf (102–115 N·m).
Figure 5.278: U-Joint
147831
436
Revision A
Summary of Contents for FlexDraper FD1 Series
