MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 344 / 510

MAINTENANCE AND SERVICING
5.6.3 Removing Driveline Guard
The main driveline guard must remain attached to the driveline during operation, but it can be removed for
maintenance purposes.
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
NOTE:
The driveline does
NOT
need to be removed from the fl oat module in order to remove the driveline guard.
1. Shut down the combine, and remove the key from
the ignition.
2. Remove driveline (A) from hook (B).
Figure 5.36: Combine End of Driveline
3. Lift the combine end of the driveline (A) from the hook,
and extend the driveline until it separates. Hold the
fl oat module end of the driveline (B) to prevent it from
dropping and hitting the ground.
Figure 5.37: Separated Driveline
147831
326
Revision A