1. Press button (A) and the current sensitivity setting will
appear on the monitor.
Figure 3.239: John Deere Combine
Command Center
2. Press the - or + icon (A) to adjust rates.
NOTE:
The numbers depicted on the displays in these
illustrations are for reference purposes only;
they are not intended to represent the speci
fi
c
settings for your equipment.
Figure 3.240: John Deere Combine Display
NOTE:
The ideal ground pressure—in most cases—is one
number (on the
fl
oat indicator box) above the header
suspended off the ground. For example, if the
fl
oat
indicator needle (A) is positioned at 0 with the header
suspended off the ground, then the ideal ground
pressure will be achieved with the needle positioned
at 1. Operating with heavier pressures can wear the
cutterbar wearplate prematurely.
Figure 3.241: Float Indicator Box
147831
162
Revision A
Summary of Contents for FlexDraper FD1 Series
