MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 294 / 510

HEADER ATTACHMENT/DETACHMENT
4.7 New Holland Combines
The FD1-Series FlexDraper is compatible with the following New Holland combines:
Series Combine Model
920, 940, 960, 970, 980
9020, 9040, 9060, 9065, 9070, 9080
6090, 7090, 8080, 8090, 9090
CR
6.80, 6.90, 7.90, 8.90, 9.90, 10.90
840, 860, 870, 880
8070, 8080, 8090 CX
8080 Elevation, 8090 Elevation
4.7.1 Attaching Header to New Holland CR/CX Combine
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
1. Ensure the handle (A) is positioned so the hooks (B)
can engage the fl oat module.
Figure 4.119: Feeder House Locks
CAUTION
Never start or move the machine until you are sure all
bystanders have cleared the area.
2. Start the engine and slowly drive the combine up to the
fl oat module until the feeder house saddle (A) is directly
under the fl oat module top cross member (B).
3. Raise the feeder house slightly to lift the header
ensuring the feeder saddle is properly engaged in the
fl oat module frame.
4. Stop the engine and remove the key from the ignition.
Figure 4.120: Header on Combine
147831
276
Revision A