MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 32 / 510

SAFETY
MD #184372
General hazard pertaining to machine operation
and servicing
CAUTION
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator’s manual and follow all safety
instructions. If you do not have a manual, obtain one
from your Dealer.
• Do not allow untrained persons to operate the machine.
• Review safety instructions with all Operators annually.
• Ensure that all safety signs are installed and legible.
• Make certain everyone is clear of machine before
starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of moving parts.
• Disengage header drive, put transmission in Neutral,
and wait for all movement to stop before leaving
operator’s position.
• Stop the engine and remove the key from ignition before
servicing, adjusting, lubricating, cleaning, or unplugging
machine.
• Engage safety props to prevent lowering of raised unit
before servicing in the raised position.
• Use slow moving vehicle emblem and fl ashing warning
lights when operating on roadways unless prohibited
by law.
Figure 1.27: MD #184372
MD #184422
Keep shields in place hazard
WARNING
• Do not place hand.
• To avoid injury, stop the engine and remove the key
before opening power drive system shield.
• Keep all shields in place.
Figure 1.28: MD #184422
147831
14
Revision A