![background image](http://html.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_operators-manual_685695166.webp)
1. Press the DIAGNOSTIC button (A) on the monitor. DIA
appears on the monitor.
2. Press the UP button (B) until EO1 appears on
the monitor and press ENTER (C). This is the
header adjustment.
3. Press the UP (B) or DOWN button until 114 is displayed
on the top portion of the monitor. This is the setting that
adjusts when the fast drop rate starts with respect to
the dead band.
NOTE:
The default setting is 100. Ideal operating range
is typically between 60 and 85.
4. Press ENTER (C) to select 114 as the fast drop rate
(this will allow you to change the
fi
rst digit of the
number sequence).
5. Press UP (B) or DOWN (E) until the desired number
is displayed, then press the CAL button (D). This will
bring you to the second digit. Repeat this procedure
until the desired setting is achieved.
6. Press ENTER (C) to save changes.
NOTE:
The numbers depicted on the displays in these
illustrations are for reference purposes only;
they are not intended to represent the speci
fi
c
settings for your equipment.
Figure 3.209: John Deere Combine Display
147831
148
Revision A
Summary of Contents for FlexDraper FD1 Series
