MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 359 / 510

MAINTENANCE AND SERVICING
6. Remove the bolts (A) securing the plastic guide (B) to
the auger, and remove the guide from inside the auger.
Figure 5.66: Auger
7. Position plug (A) (MD #187137 available from MacDon
Parts) into the hole from inside the auger, and secure
with two bolts (B). Coat the bolts with Loctite
®
#243 (or
equivalent), and torque to 75 in·lbf (8.5 N·m).
Figure 5.67: Plug
8. Replace the access cover (B) and secure with bolts (A).
Coat bolts with Loctite
®
#243 (or equivalent) and torque
to 75 in·lbf (8.5 N·m).
Figure 5.68: Auger
Installing Feed Auger Fingers
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, always stop engine
and remove key before leaving the operator’s seat, and always engage safety props before going under
the machine for any reason.
147831
341
Revision A