MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 235 / 510

OPERATION
3.13.4 Converting from Field to Transport Position
Moving Front (Left) Wheels into Transport Position
DANGER
To avoid bodily injury or death from unexpected start-up or fall of raised machine, always stop engine,
remove key, and engage safety props before going under header for any reason.
CAUTION
Stand clear of wheels and release linkage carefully as
wheels will drop once the mechanism is released.
1. Pull the handle (B) upwards to release and raise the
linkage (A) fully upwards into the vertical support.
2. Raise the header fully, stop the engine, and remove the
key from ignition. Engage the header safety props.
Figure 3.351: Suspension Linkage
3. Remove the hair pin and clevis pin (A).
4. Pull the latch handle (B) to release the suspension
linkage (C), and pull the suspension linkage away from
the spindle (D).
5. Lower the wheels slowly.
Figure 3.352: Left Front Wheels
6. Lower the handle (B) to lock.
Figure 3.353: Suspension Linkage
147831
217
Revision A