3. Select ACTUAL VALUE (A) from the AUTO REEL
SPEED dialog box (if you are using Auto Reel Speed).
The ACTUAL VALUE dialog box indicates the auto
reel speed.
Figure 3.281: Lexion Combine Display, Console,
and Joystick Lever
4. Use control knob (A) to raise or lower the reel speed.
NOTE:
This option is only available at full throttle.
Figure 3.282: Lexion Combine Display, Console,
and Joystick Lever
NOTE:
The ideal ground pressure—in most cases—is one
number (on the
fl
oat indicator box) above the header
suspended off the ground. For example, if the
fl
oat
indicator needle (A) is positioned at 0 with the header
suspended off the ground, then the ideal ground
pressure will be achieved with the needle positioned
at 1. Operating with heavier pressures can wear the
cutterbar wearplate prematurely.
Figure 3.283: Float Indicator Box
147831
180
Revision A
Summary of Contents for FlexDraper FD1 Series
