4. Loosen jam nut (A) and turn bolt (B) counterclockwise
to release the draper tension.
Repeat at the
opposite side.
Figure 5.139: Feed Draper Tensioner
5. Loosen the setscrew (B) on the bearing lock (A).
6. Using a hammer and punch, tap the bearing lock in
the direction opposite to the auger rotation to release
the lock.
Figure 5.140: Feed Draper Drive Roller Bearing
7. Loosen jam nut (A) and turn adjustment bolt (B)
counterclockwise to clear frame opening (C).
8. Remove two nuts (D).
Figure 5.141: Feed Draper Drive Roller Bearing
147831
377
Revision A
Summary of Contents for FlexDraper FD1 Series
