1. Use control knob (A) to highlight the HEADER/REEL
icon (B), and press control knob (A) to select it. The
HEADER/REEL dialog box opens.
2. Select HEADER icon.
Figure 3.276: Lexion Combine Display, Console,
and Joystick Lever
3. Select the FRONT ATTACHMENT PARAMETER
SETTINGS icon (A). A list of settings appears.
4. Select SENSITIVITY CAC (B) from the list.
Figure 3.277: Lexion Combine Display, Console,
and Joystick Lever
5. Select the SENSITIVITY CAC icon (A).
NOTE:
To set the sensitivity, you will have to change the
CUTTING HEIGHT ADJUSTMENT from the 0
default. The settings from 1–50 provide a faster
response, whereas the settings from -1 to -50
provide a slower response. For best results,
make adjustments in increments of
fi
ve.
6. Increase the CUTTING HEIGHT ADJUSTMENT
setting if the reaction time between the header and the
fl
oat module is too slow while cutting on the ground,
and decrease the CUTTING HEIGHT ADJUSTMENT
setting if the reaction time between the header and the
fl
oat module is too fast.
7. Increase the sensitivity if the header is lowered too
slowly, and decrease the sensitivity if the header hits
the ground too hard or is lowered too quickly.
Figure 3.278: Lexion Combine Display
147831
178
Revision A
Summary of Contents for FlexDraper FD1 Series
