MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 459 / 510

MAINTENANCE AND SERVICING
5.15 Transport System (Optional)
Refer to
6.3.3 Stabilizer/Slow Speed Transport Wheels, page 449
for more information.
5.15.1 Checking Wheel Bolt Torque
If a transport system is installed, adhere to the following procedure for torquing the wheel bolts:
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
before making adjustments to machine.
1. Turn off the engine and remove key.
2. Follow the bolt tightening sequence shown, and torque
the wheel bolts to 80–90 ft·lbf (110–120 N · m).
IMPORTANT:
Whenever a wheel is removed and reinstalled, check
the wheel bolt torque after one hour of operation and
every 100 hours thereafter.
Figure 5.286: Bolt Tightening Sequence
147831
441
Revision A