![background image](http://html.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_operators-manual_685695233.webp)
6. Pull the pin (A) on brace (B) on the left-hand wheel in
front of the cutterbar. Disengage the brace from the
cutterbar, and lower the brace against the axle (C).
7. Remove pin (D), lower support (E) onto axle, and
reinsert pin into support.
8. Swing the axle (C) clockwise towards the rear of
the header.
Figure 3.348: Right Rear Axle
9. Pull pin (A) on right-hand wheel, swivel the wheel
counterclockwise to position shown, and lock with
pin (A).
10. Remove the hairpin (B) from the latch (C).
11. Lift the wheel, lift latch (C), and engage lug (D) onto the
left axle. Ensure the latch closes.
12. Secure the latch with hairpin (B), ensuring the open end
of the pin faces the rear of the combine.
NOTE:
The hairpin can become dislodged by crop if
installed with the open end facing the cutterbar.
IMPORTANT:
Check that wheels are locked and that handle is
in locked position.
Figure 3.349: Rear Axles
147831
215
Revision A
Summary of Contents for FlexDraper FD1 Series
