MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 9 / 510

Model and Serial Number
Record the model number, serial number, and model year of the header, combine fl oat module, and
transport/stabilizer wheel option (if installed) in the spaces provided.
NOTE:
Right-hand (RH) and left-hand (LH) designations are determined from the operator’s position, facing forward.
FlexDraper
®
Header
Header Model:
Serial Number:
Year:
The serial number plate (A) is located beside the knife
drive motor on the left-hand endsheet.
Figure 2: Header
Combine Float Module
Float Module
Model:
Serial Number:
Year:
The serial number plate (A) is located on the underside
of the reservoir at the right end.
Figure 3: Float Module
Slow Speed Transport/Stabilizer Wheel Option
Serial Number:
Year:
The serial number plate (A) is located on the right-hand
axle assembly.
Figure 4: Transport/Stabilizer Option
147831
vii
Revision A