5. Use control knob (A) to highlight the icon that
resembles a header with up and down arrows (C), and
press control knob (A) to select it.
Figure 3.271: Lexion Combine Display, Console,
and Joystick Lever
6. Use control knob (A) to highlight the icon that
resembles a screwdriver (B).
7. Engage the combine separator and feeder house.
8. Press control knob (A) and a progress bar chart
will appear.
Figure 3.272: Lexion Combine Display, Console,
and Joystick Lever
9. Fully raise the feeder house and the progress bar chart
will advance to 25% (A).
10. Fully lower the feeder house, and the progress bar
chart will advance to 50%.
11. Fully raise the feeder house and the progress bar chart
will advance to 75%.
12. Fully lower the feeder house, and the progress bar
chart will advance to 100%.
Figure 3.273: Lexion Combine Display, Console,
and Joystick Lever
147831
176
Revision A
Summary of Contents for FlexDraper FD1 Series
