Tine Tube Support (If installed) Bushings
20. Position the bushing halves (B) on the tine tube with
the
fl
angeless end adjacent to the reel arm, and
position the lug in each bushing half into the hole in
the tine tube.
21. Slide the support (C) onto the bushing (B). For the
opposite tine tube, rotate the support (C) or slightly
move the tine tube until it clears the channels (D).
Figure 5.241: Support
Figure 5.242: Opposite Support
22. Install the bushing clamp (A) onto the tine tube adjacent
to the
fl
angeless end of the bushing (B).
23. Position the clamp (A) on the bushing (B) so the edges
of the clamp and bushing are
fl
ush when the clamp
is
fi
t into the groove on the bushing and the lock tabs
are engaged.
Figure 5.243: Bushing Clamp
147831
421
Revision A
Summary of Contents for FlexDraper FD1 Series
