MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 271 / 510

HEADER ATTACHMENT/DETACHMENT
NOTE:
Your combine feeder house may not be exactly
as shown.
Figure 4.66: AGCO Group Alignment Pins
3. Raise the feeder house slightly to lift the header,
ensuring the feeder house saddle (A) is properly
engaged in the
fl oat module frame.
4. Stop the engine and remove the key from the ignition.
Figure 4.67: Feeder House and Float Module
5. Use the lock handle (B) to engage lugs (A) with the fl oat
module.
Figure 4.68: AGCO Group Feeder House
CAUTION
Never start or move the machine until you are sure all bystanders have cleared the area.
6. Start the engine and lower the header.
7. Stop the engine and remove the key from the ignition.
147831
253
Revision A