5. Install the new bolt-on
fl
ighting (MD #213359) (A)
using six carriage head bolts (MD #184657) and nuts
(MD #135799) (B) on the right-hand side of the auger.
IMPORTANT:
Bolt heads must be installed on inside of auger
to prevent damage to internal components.
6. Reinstall
fl
ighting slot plug (C) removed in Step
.
Figure 4.25: Configuration C (RH Side)
7. Install the new bolt-on
fl
ighting (MD #213360) (A)
using six carriage head bolts (MD #184657) and nuts
(MD #135799) (B) on the left-hand side of the auger.
IMPORTANT:
Bolt heads must be installed on inside of auger
to prevent damage to internal components.
8. Reinstall
fl
ighting slot plug (C) removed in
9. Install the remaining
fl
ighting slot plugs using the M6
tee nuts in the
fl
ighting mounting locations.
10. Install additional
fi
ngers.
A total of 30
fi
nger are
recommended for this con
fi
guration. Refer to
.
Figure 4.26: Configuration C (LH Side)
4.1.7
Optional Modification to Configuration C
In some conditions, feeding may be further improved by
removing all bolt-on
fl
ightings (A). Four
fl
ighting plugs
(MD #213084), M6 bolts (MD #252522), and M6 tee nuts
(MD #197263) are recommended to cover the
fl
ighting
mounting holes.
These parts can be ordered from a
MacDon Dealer.
Figure 4.27: Configuration C (Rear View)
147831
235
Revision A
Summary of Contents for FlexDraper FD1 Series
