MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 295 / 510

HEADER ATTACHMENT/DETACHMENT
5. Lift lever (A) on the fl oat module on the left side of
the feeder house, and push the handle (B) on the
combine to engage the locks (C) on both sides of the
feeder house.
6. Push down on the lever (A) so the slot in the lever
engages the handle and locks the handle in place.
7. If the lock does not fully engage the pin on the
fl oat module when the lever (A) and handle (B) are
engaged, loosen bolts (E) and adjust the lock (C).
Retighten bolts.
Figure 4.121: Feeder House Locks
8. Open the cover on the receptacle (A) located on the
left side of the fl oat module.
9. Push in the lock button (B) and pull the handle (C) to
the full open position.
10. Clean the receptacle mating surfaces.
Figure 4.122: Float Module Receptacle
11. Remove the hydraulic quick coupler (A) from the
storage plate on the combine, and clean the mating
surface of the coupler.
Figure 4.123: Combine Coupler
147831
277
Revision A