![background image](http://html.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_operators-manual_685695263.webp)
8. Open the cover on the receptacle (A) located on the
left side of the
fl
oat module.
9. Press the lock button (B) and pull the handle (C) to the
fully open position.
10. Clean the receptacle mating surfaces.
Figure 4.48: Float Module Receptacle
11. Remove the hydraulic quick coupler (A) from the
combine and clean the mating surfaces.
Figure 4.49: Combine Connectors
12. Position the coupler onto the coupler receptacle (A)
and push the handle (B) (not shown) to engage the
multicoupler pins into the receptacle.
13. Push the handle (B) to the closed position until the lock
button (C) snaps out.
Figure 4.50: Hydraulic Connection
147831
245
Revision A
Summary of Contents for FlexDraper FD1 Series
