background image

10001328/A1

 

Rev. 1 

Thermoreactor ECO8 
with safety cover  
and prefixed temperatures  
and times 

 
 
 

Operation Manual 

 
 

IMPORTANT: 

READ THE INFORMATION CONTAINED IN THE OPERATION MANUAL BEFORE USING THE 
UNIT. THE MANUFACTURER DOES NOT ACCEPT RESPONSIBILITY FOR THE IMPROPER 
USE OF THE EQUIPMENT OR FOR FAILURE TO FOLLOW INSTRUCTIONS. 
 
The labels applied to the unit warn of the dangers to which the user may be exposed during use or 
maintenance of the unitthermoreactor. The labels must be left on the unit and replaced if they are 
no longer readable. 
 

Danger Warning

To prevent accidents associated with the use of this instrument 
 

 
 

Start of Operations:

 

Read instructions for use and maintenance before using this instrument 
 
 

SAFETY RULES 
1)

 The heating plate if programmed, may reach a temperature of 150°C, this happens during the 

heating phase but also during the cooling phase. 

2)

 The containers and the products used during the work must be compatible with the temperature 

set on the unit. 

3

) The instrument is equipped by a voltage changer accessibile on the rear panel which allows the 

connection to electric nets with 230 V or 115 V. 
Before connecting the instrument to electric supply verify that the voltage changer is on the position 
corresponding to the supplied voltage. 
 

CLEANING 

Always unplug the unit before cleaning. The heating plate must be cool.  
Use a damp cloth and not flammable, not aggressive detergents. 

 
PERSONAL PROTECTION EQUIPMENT 

The equipment used for personal protection must be compatible with the possible dangers deriving 
from the working materials and from the glass vessels. 

 
MAINTENANCE 

According to the law on products guarantee our instrument must be repaired at our factory, save 
different agreements with our agents. For more information see the “Maintenance” Chapter in this 
manual. 

 
GUARANTEE 

Starts from the date of delivery note and is referred to the number of register of the single unit. 
 
The manufacturer, engaged in a continuous improvement of his products reserves the right to 
modify any of their characteristics without notice. 
 

 

 

 

 

Summary of Contents for ECO 8













Reviews: