GSK GSK988TA, Manual

Page: 412 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
394
Appendix
Input in mm 0.001 0.0001 mm
Input in inch system 0.0001 0.00001 inch
『
Default Setting
』
:0
Set the allowable error value of arc interpolation (G02, G03) starting point radius and its finishing
point radius. P/S alarms when arc interpolation radius error is more than the limit value.
3411 M code 1 for stopping the buffer (BLKM1)
3412 M code 2 for stopping the buffer (BLKM2)
3413 M code 3 for stopping the buffer (BLKM3)
3414 M code 4 for stopping the buffer (BLKM4)
3415 M code 5 for stopping the buffer (BLKM5)
3416 M code 6 for stopping the buffer (BLKM6)
3417 M code 7 for stopping the buffer (BLKM7)
3418 M code 8 for stopping the buffer (BLKM8)
『
Modification authority
』
: Equipment management
『 Validate method 』： Immediately
『
Parameter Type
』：
Word
『
Value Range
』：
0
～
9999
『
Default Setting
』：
0
This parameter sets the M code for stopping the buffer. Before ending the treatment of the M
function at the side of the machinery, it is necessary to perform the operation treatment specified by M
code by machinery, and then set this code.
#7 #6 #5 #4 #3 #2 #1 #0
3450 AUP
『
Modification authority
』
: Equipment management
『 Default Setting 』： 0000 0000
#0 AUP In the 2nd miscellaneous function command, the counter decimal point input, the
Note: When the setting value is 0, it doesn’t require checking the arc radius error.