GSK GSK988TA, Manual

Page: 425 / 531

Appendix 1 Parameters
407
Appendix
4911
The allowable rate q of the spindle arrival commanded speed
(SSQ)
『
Modification authority
』
: Equipment management
『 Way of Validating 』 :
『
Value Range
』：
『
Default Setting
』：
100
The allowable rate q of the spindle arrival commanded speed is set in the spindle speed changing
detection function
4912
The rate r of spindle change without sending the spindle speed
changing detection alarm (SSR)
『
Modification authority
』
: Equipment management
『
Way of Validating
』
:
『 Value Range 』：
『
Default Setting
』：
100
The rate r of spindle change is set without sending the alarm in the spindle speed change detection
function.
4913
The change magnitude i of the spindle speed without sending the
spindle speed change detection alarm (SSI)
『
Modification authority
』
: Equipment management
『
Way of Validating
』
:
『
Value Range
』：
0
～
99999
『 Default Setting 』： 100
The allowable magnitude i is set in the spindle speed change detection function without sending
the alarm
4914
The time p from commanding the speed change to starting
detecting the spindle speed change (SSP)
『 Modification authority 』 : Equipment management
『
Way of Validating
』
:
『
Value Range
』：
1
～
999999
『
Default Setting
』：
100
In the spindle speed change detection function, the time p from commanding the speed change
to starting detecting the spindle speed change