GSK GSK988TA, Manual

Page: 362 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
344
Ⅱ
Operation
Fig.10-3
（
5
）
When X axis remains still, the tool is released along Z axis, the spindle is stopped revolving,
the workpiece excircle dimension is measured (the measured value is 49.5mm); the system switches
to the tool offset page and moves the cursor to #001 offset, and software key is
pressed, X axis tool offset is input.
（
6
）
Move the tool into the safe position, and execute the 2
nd
tool by pressing the tool change key
in Manual mode;
（
7
）
Start the spindle and move the tool into the tool setting position, which is shown as Fig. 10-4,
like point A:
Fig.10-4
(8) The system switches into the tool offset page, and the cursor is moved toward #002 offset, the
software key is pressed to enter the measuring input page, X49.5 is input on the input
page , and software key is pressed, Z0 is input with the same
method;