GSK GSK988TA, Manual

Page: 385 / 531

Appendix 1 Parameters
367
Appendix
#7 #6 #5 #4 #3 #2 #1 #0
1310 OT3x OT2x
『 Modification authority 』 : Equipment management
『
Parameter Type
』
: Bit axis
『
Default Setting
』
: 0000 0000
#0 OT2X Whether each axis detects the stroke 2 in memory type
0: Not detect
1: Detect
#1 OT3X Whether detect the stroke 3 in memory type in each axis
0: Not detect
1: Detect
1320
Coordinate value in positive direction boundary of each axis
stroke detection 1 in memory type （ PC1 ）
1321
Coordinate value in negative direction boundary of each axis
stroke detection 1 in memory type
（
NC1
）
『
Modification authority
』
: Equipment management
『 Parameter Type 』 : Word axis
『
Default Setting
』
: No.1320 is 99 999 999, No.1321 is
－
99 999 999
『
Value Range
』
:
－
99 999 999
～
99 999 999
Respectively set the coordinate values of boundaries in positive/negative directions in the
mechanical coordinate system in stroke detection 1 along each axis in memory type. Set the outside
of boundary as the restricted area to tools.
1. The axes specified by diameter are set by diameter value.
2. When (parameter No.1320) < (parameter No.1321) and the limit is infinite, it can not detect the stroke
1 in memory type. (The stroke limit switching signal in memory type is invalid.) If the absolute
command is specified, the coordinate value may overflow; the normal movement can not be
executed.
1322
Coordinate value in positive direction boundary of each axis
stroke detection 2 in memory type
（
PC2
）