GSK GSK988TA, Manual

Page: 281 / 531

Chapter 3 Display Page
263
Ⅱ
Operation
3.4.2 CNC Setting Page
On setting page set, press software key to enter CNC system setting page and it
mainly includes the system setting, the coordinate setting, the system time and the system IP.
3.4.2.1 System Setting Page
On CNC setting page set, press to enter the system setting page and it includes
setting the program switch, the parameter switch, the automatic sequence number and the inputting
unit, etc, which is shown in Fig.3-42:
Fig.3-42
The page is mainly for setting ON/OFF of the program and the parameter switches, etc.
On the page, the program switch, the parameter switch, the automatic sequence number and the
input unit can be switched by and key. In MDI status, when the operation authority
level is equal to or higher than level [3], ON/OFF of the switch, inch/metric system can be selected by
pressing , or keys.
On the right column of the page, the current absolute position coordinate, the relative coordinate
position value and the tool number used in the current program are displayed meanwhile.
Note 1: Only when the program switch or the parameter switch is ON, the program or the parameter can
be edited, rewritten or set.
Note 2: Only when the operation authority is equal to or higher than level [3], CNC system can be set.
Note 3: Only when the program protection switch on the machine panel is ON, the program and the
parameter switches ON/OFF can be set.
Note 4: Only when the operation authority is equal to or higher than level [2], the password of macro
programs can be modified.