GSK GSK988TA, Manual

Page: 366 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
348
Ⅱ
Operation
Ｎ０３７０
M9
；
Switch off the coolant
Ｎ０３８０ M13 ； Release the chuck
Ｎ０３９０
M30
；
Program end
4
）
Tool setting and running
（
1
）
Move the tool into the safe position, execute T0100 in MDI mode and on the program status
page, change the tool and cancel the tool offset;
（
2
）
Move the tool and the tool is cut along the workpiece end face, which is shown as Fig. 10-6;
Fig.10-6
（ 3 ） When Z axis remains still, the tool is released along X axis, the spindle is stopped revolving,
and the system switches into the tool offset page, and the cursor is moved toward #001 offset, the
software key is pressed to enter the measuring input page, Z0 is input on the input
page , and software key is pressed, the tool offset value of Z axis is
input.
（ 4 ） The tool is moved and the tool is cut along the workpiece excircle, which is shown as Fig. 10-7:
Fig.10-7
（
5
）
When X axis remains still, the tool is released along Z axis, the spindle is stopped revolving,