Chapter 3 Display Page
233
Ⅱ
Operation
3.1.5 Relative Coordinate Setting
On the position display page set, press
software key to set the relative
coordinate, which is shown in Fig.3-7:
Fig.3-7
Then, the relative coordinate value of each coordinate axis can be set. The setting steps are:
（
1
）
During resetting, press
software key to input the relative coordinate
axis, like the relative coordinate value U in the above figure;
（
2
）
Press
or
to select the coordinate axis to be set, and the axis can be
input;
（
3
）
Input the relative coordinate values and press
key to complete setting; the
cursor is moved into the next axis and the relative coordinate of the next axis can be set. If there
is no axis after the current one, setting the relative coordinate is completed.
3.1.6 Switch between the Modal and the Comprehensive Message
On the position page set, press
and
to switch between the
modal the comprehensive message, the modal display page is shown in Fig.3-8:
Summary of Contents for GSK988TA
