GSK GSK988TA, Manual

Page: 267 / 531

Chapter 3 Display Page
249
Ⅱ
Operation
be rewritten; or press software key to input K variable to be selected, and then press
software key to move the cursor to position in the parameter. The meaning of the
status bit is displayed at the bottom of the screen.
(3) key is pressed repeatedly and the status bit can be switched between 0 and 1, and
the status of the selected K parameter status bit can be rewritten.
(4) Press , , , to move the cursor to complete rewriting.
Press software key to input K parameter address to be searched and the cursor
is positioned to K parameter address to be searched.
2. Setting D parameter
（
1
）
In PLC data status display page, press software key to enter setting
parameter D display page, which is shown in Fig.3-26:
Fig.3-26
（
2
）
Press , , , key to select parameter D to be rewritten; or press
software key to input parameter D to be selected, and then press
software key to move the cursor to position in the parameter. The meaning
of the parameter is displayed at the bottom of the screen;
（ 3 ） Press key to make the selected parameter D modifiable.