Appendix 1 Parameters
393
Appendix
#7 #6 #5 #4 #3 #2 #1 #0
3404
M3B
EOR
M02
M30
『
Modification authority
』
: Equipment management
『
Default Setting
』
: 0000 0000
#4 M30 During auto running, process M30 command
0: return to the beginning of the program.
1: doesn’t return to the beginning of the program.
#5 M02 During auto running, process M02 command
0: return to the beginning of the program.
1: doesn’t return to the beginning of the program.
#6 EOR During executing the program, read in “%” (program end)
0: P/S alarms (stop auto running, display alarm state)
1: Not alarm (auto running stops, the system resets)
Note: When performing the “%” (end-of-program), CNC resets instead of closing the
miscellaneous function output.
#7 M3B The quantity of M codes which can be commanded in one block
0: One
1: Maximum three
#7 #6 #5 #4 #3 #2 #1 #0
3405
DDP
AUX
『
Modification authority
』
: Equipment management
『
Default Setting
』
: 0000 0000
#0 AUS In the 2nd miscellaneous function, the command counter decimal point input or the
command with decimal point, as well the override corresponding to the command value
output
0
:
The metric input is identical with the inch input
1
:
The override set by inch input sets as the 10 times of the override for the metric input
#5 DDP The angle command is directly input based upon the drawing dimension
0
:
Common specification
1
:
Command supplementary angle
3410
Circular radius allowable error (CRE)
『
Modification authority
』
: Equipment management
『
Value Range
』
: 0
~
9999 9999
Setting unit
IS
-
B IS
-
C Unit
Summary of Contents for GSK988TA
