GSK GSK988TA, Manual

Page: 306 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
288
Ⅱ
Operation
： equal to “=” in the counter.
：
clear the counter’s data.
： send the current counter’s value to the page where the cursor is.
：
exit the count function.
4.2.2 Rewriting a Program
（
1
）
The program is opened based on Section 4.1.4;
（ 2 ） The cursor is moved toward the program line to be rewritten by pressing ,
, , keys; the cursor is moved toward the character to be rewritten by
pressing , keys; the block or the character to be rewritten can be rapidly found
by pressing and ;
（
3
）
The program code is rewritten based on the address and the numerical keys on the edit
keypad;
（
4
）
One character before the position, on which the cursor is, is deleted by pressing
key;
（
5
）
One character after the position, on which the cursor is, is deleted by pressing key;
（
6
）
Press software key to save the currently rewritten program.
4.2.3 Shortcut Keys
During the program editing, the system provides some shortcut keys to edit and rewrite the
program.
Adjusting the cursor
Press and meanwhile to move the cursor to the file ahead;
Press and meanwhile to move the cursor to the file end;