GSK GSK988TA, Manual

Page: 445 / 531

Appendix 1 Parameters
427
Appendix
Appendix 1.19 Parameter of the Skip Function
#7 #6 #5 #4 #3 #2 #1 #0
6200 SKF SK0
『
Modification authority
』
: Machine
『
Default Setting
』
: 0000 0000
#1 SK0 Set the valid state of the skip signal
0: valid when the input signal is “1”
1: valid when the input signal is “0”
#7 SKF Dry run and override for G31 jumping command are:
0: disabled
1: enabled
#7 #6 #5 #4 #3 #2 #1 #0
6210 MDC
『
Modification authority
』
: Equipment management
『 Default Setting 』 : 0000 0000
#6 MDC the measured automatic tool compensation value is
0: added to the current offset value
1: subtracted from the current offset value
#7 #6 #5 #4 #3 #2 #1 #0
6240 IGA AE0
『
Modification authority
』
: Machine
『
Validate method
』
: After power-on
『
Default Setting
』
: 0000 0000
#0 AE0 Automatic tool compensation signal (X3.6), XAE2 (X3.7) indicates:
0: the measuring position is reached when it is 1
1: the measuring position is reached when it is 1
#7 IGA Automatic tool compensation function is:
0: used
1: not used
6241 Feedrate during automatic compensation (for XAE1 signal)(ATOF1)