GSK GSK988TA, Manual

Page: 302 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
284
Ⅱ
Operation
4.1.5 Deleting a Program
（
1
）
On the program page set, press , , , key to move the cursor for
selecting the program to be deleted, and the background of the selected program is
changed into green.
（
2
）
Press software key to delete the selected program.
4.1.6 Outputting a Program
The system USB port is with the USB flash disc, an U disk icon appears at lower right
corner of the screen, and there is a key for an U disk catalog in the program page, which is shown in
Fig.4-4.
Fig.4-4
The programs of the USB flash disc directory can be copied into the local one by pressing
software key, vise versa. The files in the USB flash disc are copied into the system,
the detailed steps are as below:
（ 1 ） Press software key to enter the USB flash disc file directory;
（
2
）
Press , cursor key to select the programs to be copied, and press and
, the selected programs in the USB flash disc are copied into the local directory;
（ 3 ） Similarly, the programs of the local directory are copied into the USB flash disc,
software key is directly pressed to enter the system program file directory.