GSK GSK988TA, Manual

Page: 380 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
362
Appendix
0
：
Do not return to G54
1 ： Return to G54
#7 WZR Work piece coordinate system during resetting
0: Not return to G54
1: Return to G54
#7 #6 #5 #4 #3 #2 #1 #0
1202 RLC G50 EWS EWD
『 Modification authority 』 : Equipment management
『
Default Setting
』
: 0000 0000
#0 EWD The movement direction of the coordinate system caused by the external work piece
origin offset amount
0: It is same as the direction specified by the external work piece origin offset amount.
1: It is opposite to the direction specified by the external work piece origin offset amount.
#1 EWS The work piece coordinate system movement amount and the external work piece
zero point offset amount
0: Saved in each memorizer
1: Saved in one memorizer (the work piece coordinate system movement amount is same as
the external work piece zero point offset amount
#2 G50 When G50 is commanded and the coordinate system is set,
0: Not alarm, but execute G50
1: P/S alarms (No.010), not execute G50
#3 RLC After resetting, the part coordinate system
0: Not cancel
1: Cancel
#7 #6 #5 #4 #3 #2 #1 #0
1205 MCE
『
Modification authority
』
: Equipment management
『
Default Setting
』：
0000 0000
#0 MCE Whether the coordinate system is memorized with power-on when adapting with
the incremental encoder.
0
：
Do not memory
1
：
Memory
1206
The allowable value of the machine coordinate system with the
absolute encoder after power on (MER)