GSK GSK988TA, Manual

Page: 404 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
386
Appendix
control I/O unit 1.
3052 The logic ID number (IOID2) of system control I/O unit 2
『 Modification authority 』 : Machine
『
Value Range
』：
0,100~110
『
Default Setting
』：
0
Set the logic ID number (0 means that this I/O unit disconnects with the GSKLink) of the system
control I/O unit 2.
3053 The logic ID number (IOID3) of system control I/O unit 3
『
Modification authority
』
: Machine
『
Value Range
』：
0,100~110
『
Default Setting
』：
0
Set the logic ID number (0 means that this I/O unit disconnects with the GSKLink) of the system
control I/O unit 3.
3054 The logic ID number (IOID4) of system control I/O unit 4
『
Modification authority
』
: Machine
『
Value Range
』：
0,100~110
『 Default Setting 』： 0
Set the logic ID number (0 means that this I/O unit disconnects with the GSKLink) of the system
control I/O unit 4.
3060 The logic ID number (GWID) of the system gateway control
『
Modification authority
』
: Machine
『 Value Range 』： 0,200~254
『
Default Setting
』：
0
This parameter setting system controls the logic ID number of the gateway. (0 means not use the
gateway
#7 #6 #5 #4 #3 #2 #1 #0
3061 GWP GWC
『 Modification authority 』 : Machine
『
Validate method
』
: After power-on
『
Parameter Type
』：
Bit
『
Default Setting
』：
0000 0000