GSK GSK988TA, Manual

Page: 488 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
470
Appendix
Alarm
No.
Meaning Possible Alarm Reason Troubleshooting
interpolation 00:G04 or G65.
2.Group 01:G01, G02 or G03.
3. Group 03(G98/G99 in A-type-g
code, G94/G95 in B-type-g
code).
4. Group 05:G40~G43, and
Group 09:G66/G67.
270
G50 is invalid
Alarm when specify coordinate
set command(G50 in A-type-G
code,G92 in B-type-G code),refer
to Para.1202#2
271
Value to set the
coordinate system
is out of range Refer to the valid range of
G50(G92 in B-type-G
code)/G52/G53/G54~G59
272
Address P out of
range for Append
coordinate Address P to select append
coordinate is out of range in
G54.1
280
Address P not
defined
Address P(program number) was
not commanded in block
including M98, G65 or G66
281
Subprogram
nesting error The subprogram call exceeds 12
folds
282
Program number or
sequence number
not found The program number was not
found specified by P in M98,
M99, G65 or G66.
283
Fail to open the
program during
sub-program calling
Sub-program calling; fail to open
the sub-program when the
internal preread sub-program
occurs.
284
Fail to init nc buffer
of sub program
Fail to buffer the initial
sub-program when sub-program
calls.
285
Subprogram call
error
A program can't call main
program or itself in M98,G65 or
G66
286
Subprogram in use
Sub program can't be called
because it is in edit state or
unsaved state
287
Program call
statement can't run
in MDI&DNC
operation
Marco program and subprogram
call in MDI &DNC operation isn't
supported
300
Illegal G code
specified with
multi-spindle
control
When select spindle in
multi-spindle control function,
illegal G code is specified with
S_P_;S_ and G25/G26, S_P_
and G96/G97 can't be specified
in same block